Zoom G7.1ut - Efect chitara

DSP sound modeling plus tube circuitry create the ultimate in distortion. 96 kHz sampling and 24-bit A/D/A conversion assure super high resolution sound. An abundance of signal processing power allows accurate recreation of the complex upper-range harmonics that are the hallmark of tube amplifiers. Analog circuitry using a 12AX7 tube then adds that classic warmth and sonic impact to the DSP sound. The result combines the best of the digital and analog worlds: distortion so advanced and sophisticated it elevates your guitar playing to the next level.

Preamp section with two channels
The preamp section, comprised of the amp/drive-modeling, and EQ modules offers two channels per patch. You can easily select a channel by simple foot switch operation. Toggle between a Fender clean sound for rhythm and a Marshall drive sound for lead, while keeping modulation and spatial effect settings the same. The user interface with analog knobs lets you shape the sound with the same facility as on a guitar amp.

Great for stage work or direct recording
The amp/drive-modeling blocks have two dedicated algorithms for each amp/drive type, designed for live playing and direct recording. The CABINET effect simulates amp and mic recording characteristics as well, and the algorithm is automatically switched according to the CABINET on/off setting.This lets you bring the same guitar sound that you used during practice or recording right on to the stage. Alternatively, sound settings that were determined during a session with the band can be used seamlessly in the studio as well.

Amp select feature
This function optimizes frequency response to match the amp that you are using. Settings are available to get the best out of popular models such as Roland JC-120, a Fender combo, and a Marshall stack. The -10 dBm/+4 dBm output level switch allows the G7.1ut to be used as a preamp, directly connected to the power amp input of a guitar amplifier.

6-band graphic equalizer
The built-in EQ module has six frequency bands optimized for electric guitar. Peaking type filters in the crucial middle range (400 Hz, 800 Hz, 3. 2 kHz, 6.4 kHz) are augmented by shelving type filters at the low and high end (160 Hz and 12 kHz). This ensures the shortest possible route from inspiration to actual sound.

Guitar amplifier/stomp box modeling
Analog devices such as tubes and diodes have unique clipping characteristics. Sophisticated digital simulation finally makes it possible to recreate the sound of vintage tube amps and effect devices with astonishing realism. From popular names such as Fender, Marshall, and VOX to modern amps including MESA BOOGIE, Hughes & Kettner, and Diezel - the list of choices is extensive. The cabinet simulator even has settings for mic position, to achieve totally natural sounding performance.

Specifications

Effect Types: 92
Effect Modules: 9
Maximum Simultaneous Effects: 9
Patch Memory: User 80+Preset 80, Total 160
Sampling Frequency: 96kHz
A/D Conversion: 24bit, 64times over-sampling
D/A Conversion: 24bit, 128times over-sampling
Signal Processing: 32bit
Frequency Response: 20Hz-40kHz +1.0dB、-3.0dB (10kΩload)
Guitar Input: 1/4" phone jack (Rated input level: -10dBm, Input impedance:1MΩ)
AUX Input: 1/8" stereo phone jack (Rated input level: -10dBm, Inputimpedance: 10ｋΩ)
Line Output (L/MONO, R): 2 x 1/4" phone jack (Rated output level:-10dBm/+4dBm, Maximum output level: +19dBm, Output load impedance: 10kΩ or more, Output Impedance: 1kΩ)
Headphone Output: 1/8" stereo phone jack (Rated output: 60mW /32Ω load,20mW /300Ω, Output impedance: 47kΩ)
Tube Circuitry: 12AX7
Control Input: FP02
MIDI: IN / OUT
USB Interface: 16bit, 32kHz/44.1kHz/48kHz
Display: 2digit 7segment LED display, backlit LCD Power Requirements: 15V AC, 1.5A
Dimensions: 460(W) x 235(D) x 81(H)mm
Weight: 4.0kg
Supplied Accessory: AC adaptor (AD-0012)
Optional Accessories: Expression pedal (FP02)